PRODUCT CATEGORY
Binder and matrix systems designed for retention, wear balance, and stable hot-press behavior.
AVAILABLE GRADES
Review individual chemistry, technical specifications, application guidance, material comparisons, and inquiry access for every published grade in this category.
99.8% submicron cobalt binder powder for carbide inserts and diamond tool bonds. O < 0.8%, magnetic assay certified, extra-fine grades for ultrafine carbide lines.
Cr3C2 powder, 2200 HV, oxidation-resistant to 900°C. Spray-blend grade for Cr3C2-25NiCr HVOF coatings, CCO wire fill and cermet additive cuts. XRD phase certified.
Pre-alloyed FeCuCo bond powder for diamond saw segments and core drills. Ratios from Fe70Cu20Co10 to Fe50Cu20Co30, custom blends, sintered data per lot. No WC, no licensing.
TiC powder 0.8-10µm, 3000+ HV, half the density of WC, tungsten-free. Cermet cutting tool grade (low O, certified carbon) and PTA/laser cladding wear grades.
Ti(C,N) powder 0.8-2µm for cermet cutting inserts. TiC0.5N0.5 to TiC0.7N0.3 and custom ratios, O < 0.6%, certified carbon/nitrogen per lot. Tungsten-free.
CATEGORY INTRODUCTION
Binder and matrix systems designed for retention, wear balance, and stable hot-press behavior.
Metal3DP organizes this family around hot pressing · infiltration, with material options including Co · Cu · Fe · WC Systems. Individual grades document the chemistry, particle behavior, technical limits, applications, and relevant material comparisons.
Standard products can be matched to established manufacturing routes, while custom programs can align particle cuts, composition, processing, packaging, and lot inspection with the customer’s production window.
CATEGORY ADVANTAGES
A useful powder specification connects material composition, particle behavior, manufacturing conditions, inspection, and supply consistency.
Particle size, morphology, flow, apparent density, and surface condition are aligned with the intended manufacturing route.
Standard and custom compositions connect material behavior with service temperature, wear, strength, conductivity, or joining performance.
Agreed chemistry, particle distribution, inspection values, packaging, and traceability can be controlled at lot level.
Material selection starts with the equipment, process window, finished component, annual volume, and quality requirements.
COMPANY INTRODUCTION
Metal3DP Technology Co., Ltd. is an advanced metal powder supplier headquartered in Qingdao, China. We combine material engineering, powder production resources, application support, inspection, and international supply coordination across demanding manufacturing processes.
For carbide & diamond tool matrix powders, our team translates equipment, process conditions, finished-part targets, annual volume, and documentation needs into a practical purchase specification and quality plan.
About Metal3DPCATEGORY FAQ
Technical answers for material selection, customization, quality documentation, and supply discussions.
Carbide & Diamond Tool Matrix Powders support manufacturing routes and industrial applications where chemistry, particle size, morphology, and process consistency directly influence finished-part performance. Review the individual grades for specific applications and operating windows.
Start with the application and manufacturing process, then define chemistry, particle distribution, morphology, flow, apparent density, and any critical performance targets. Metal3DP can compare these requirements with the available carbide & diamond tool matrix powders.
Yes. Depending on the material family and production route, custom chemistry, particle cuts, blending, coating, heat treatment, and packaging can be reviewed against the required volume and specification.
Available documentation can include chemical composition, particle size distribution, morphology, apparent density, flow behavior, and other agreed inspection values on a lot-level certificate of analysis.
Share the product or alloy, process, target particle size, equipment, finished application, annual volume, destination, and required standards. This allows the material team to identify a standard grade or define a custom supply specification.
CUSTOM POWDER PROGRAMS
Share your process, equipment, performance target, annual volume, and destination. We will match an existing grade or define a custom supply specification.
