PRODUCT CATEGORY
Copper, aluminum, nickel, and zinc families with particle control for industrial processing.
AVAILABLE GRADES
Review individual chemistry, technical specifications, application guidance, material comparisons, and inquiry access for every published grade in this category.
AAC-grade aluminum paste, fast/standard/delayed gas curves certified per lot, 65-72% solids, water-based options. 0.4-0.6 kg/m³ dosing, custom reactivity tuning.
Angular HDH titanium powder, CP Gr1-4 and Ti6Al4V, mesh to <20µm MIM cuts, O 0.15-0.45% selectable, H < 0.015% certified. Fraction of spherical powder cost.
ISO 3549 zinc dust, metallic Zn >94-97%, D50 2-10µm for C4/C5 zinc-rich primers, Merrill-Crowe gold recovery and battery grades. DG-compliant global shipping.
99.9% carbonyl nickel, fine spiky 2-5µm and filamentary grades. Battery-grade low-S lots, conductive paste percolation data, BET/FSSS certified per lot.
Passivated Mg granules 0.2-1.6mm, active Mg 92-98%, certified ignition and reactivity per lot. Co-injection blends and cored-wire feedstock. Annual contract supply, DG compliant.
Gas-atomized spherical Al, 1-106µm cuts, active Al >98-99.5%, Hall-flow certified AM grades and tight-D50 solar paste grades. UN DG packed. Custom distributions.
CATEGORY INTRODUCTION
Copper, aluminum, nickel, and zinc families with particle control for industrial processing.
Metal3DP organizes this family around forming · coating · metallurgy, with material options including Cu · Al · Ni · Zn. Individual grades document the chemistry, particle behavior, technical limits, applications, and relevant material comparisons.
Standard products can be matched to established manufacturing routes, while custom programs can align particle cuts, composition, processing, packaging, and lot inspection with the customer’s production window.
CATEGORY ADVANTAGES
A useful powder specification connects material composition, particle behavior, manufacturing conditions, inspection, and supply consistency.
Particle size, morphology, flow, apparent density, and surface condition are aligned with the intended manufacturing route.
Standard and custom compositions connect material behavior with service temperature, wear, strength, conductivity, or joining performance.
Agreed chemistry, particle distribution, inspection values, packaging, and traceability can be controlled at lot level.
Material selection starts with the equipment, process window, finished component, annual volume, and quality requirements.
COMPANY INTRODUCTION
Metal3DP Technology Co., Ltd. is an advanced metal powder supplier headquartered in Qingdao, China. We combine material engineering, powder production resources, application support, inspection, and international supply coordination across demanding manufacturing processes.
For non-ferrous base metal powders, our team translates equipment, process conditions, finished-part targets, annual volume, and documentation needs into a practical purchase specification and quality plan.
About Metal3DPCATEGORY FAQ
Technical answers for material selection, customization, quality documentation, and supply discussions.
Non-Ferrous Base Metal Powders support manufacturing routes and industrial applications where chemistry, particle size, morphology, and process consistency directly influence finished-part performance. Review the individual grades for specific applications and operating windows.
Start with the application and manufacturing process, then define chemistry, particle distribution, morphology, flow, apparent density, and any critical performance targets. Metal3DP can compare these requirements with the available non-ferrous base metal powders.
Yes. Depending on the material family and production route, custom chemistry, particle cuts, blending, coating, heat treatment, and packaging can be reviewed against the required volume and specification.
Available documentation can include chemical composition, particle size distribution, morphology, apparent density, flow behavior, and other agreed inspection values on a lot-level certificate of analysis.
Share the product or alloy, process, target particle size, equipment, finished application, annual volume, destination, and required standards. This allows the material team to identify a standard grade or define a custom supply specification.
CUSTOM POWDER PROGRAMS
Share your process, equipment, performance target, annual volume, and destination. We will match an existing grade or define a custom supply specification.
