PRODUCT CATEGORY
Chemistry and insulation options tuned for magnetic response, core loss, and forming performance.
AVAILABLE GRADES
Review individual chemistry, technical specifications, application guidance, material comparisons, and inquiry access for every published grade in this category.
50Ni-50Fe soft magnetic powder for current transformer cores, RCD toroids and magnetic shielding. Spherical and flake forms, Mo-bearing high-µ variants, lot test-ring data.
Gas-atomized sendust (Fe-9.6Si-5.4Al) powder for 26-125µ power cores. 1.05T saturation, low loss to 200 kHz, certified lot core-loss data. EV charger and solar inductor grades.
Amorphous and nanocrystalline (FeSiBPCu) powder for 5-500 kHz inductors, wireless charging and EMI cores. XRD-certified amorphous fraction, lot loss data, no rare earths.
Spherical FeSiCr powder, D50 10-25µm, for MHz molded power inductors. Cr-passivated for 85/85 humidity life. Custom Si/Cr ratios and coated grades.
SMC-grade insulated pure iron powder for axial-flux and transverse-flux motors. 7.5+ g/cm³ green density, certified 1T/1kHz loss data, warm-compaction grades.
SrFe12O19 powder for sintered anisotropic and bonded magnets. Br to 440 mT, 250°C stability, no rare earths, no export controls. Press-ready granulate and La-Co high-performance grades.
CATEGORY INTRODUCTION
Chemistry and insulation options tuned for magnetic response, core loss, and forming performance.
Metal3DP organizes this family around compaction · annealing · coating, with material options including FeSi · FeNi · FeCo · SMC. Individual grades document the chemistry, particle behavior, technical limits, applications, and relevant material comparisons.
Standard products can be matched to established manufacturing routes, while custom programs can align particle cuts, composition, processing, packaging, and lot inspection with the customer’s production window.
CATEGORY ADVANTAGES
A useful powder specification connects material composition, particle behavior, manufacturing conditions, inspection, and supply consistency.
Particle size, morphology, flow, apparent density, and surface condition are aligned with the intended manufacturing route.
Standard and custom compositions connect material behavior with service temperature, wear, strength, conductivity, or joining performance.
Agreed chemistry, particle distribution, inspection values, packaging, and traceability can be controlled at lot level.
Material selection starts with the equipment, process window, finished component, annual volume, and quality requirements.
COMPANY INTRODUCTION
Metal3DP Technology Co., Ltd. is an advanced metal powder supplier headquartered in Qingdao, China. We combine material engineering, powder production resources, application support, inspection, and international supply coordination across demanding manufacturing processes.
For soft magnetic & magnetic material powders, our team translates equipment, process conditions, finished-part targets, annual volume, and documentation needs into a practical purchase specification and quality plan.
About Metal3DPCATEGORY FAQ
Technical answers for material selection, customization, quality documentation, and supply discussions.
Soft Magnetic & Magnetic Material Powders support manufacturing routes and industrial applications where chemistry, particle size, morphology, and process consistency directly influence finished-part performance. Review the individual grades for specific applications and operating windows.
Start with the application and manufacturing process, then define chemistry, particle distribution, morphology, flow, apparent density, and any critical performance targets. Metal3DP can compare these requirements with the available soft magnetic & magnetic material powders.
Yes. Depending on the material family and production route, custom chemistry, particle cuts, blending, coating, heat treatment, and packaging can be reviewed against the required volume and specification.
Available documentation can include chemical composition, particle size distribution, morphology, apparent density, flow behavior, and other agreed inspection values on a lot-level certificate of analysis.
Share the product or alloy, process, target particle size, equipment, finished application, annual volume, destination, and required standards. This allows the material team to identify a standard grade or define a custom supply specification.
CUSTOM POWDER PROGRAMS
Share your process, equipment, performance target, annual volume, and destination. We will match an existing grade or define a custom supply specification.
