PRODUCT CATEGORY
Reactive, reducing, alloying, and catalytic metal powders supplied around process requirements.
AVAILABLE GRADES
Review individual chemistry, technical specifications, application guidance, material comparisons, and inquiry access for every published grade in this category.
Atomized FeSi15 for DMS plants with magnetic recovery certification; milled FeSi for steel and foundry; low-Al Pidgeon grade. Annual plant contracts.
FeTi 30/40/70 and FeB 15-20% powders, cored-wire fill grades, certified gas content. Stainless stabilization, IF steel, boron hardenability. Mill qualification support.
LaNi5-type AB5 and AB2 alloys with certified capacity, cycle life and PCT curves. Light-rare-earth composition — outside export controls. Battery and tank grades.
99%+ aluminum powder and granules, moisture-certified <0.05% for melt safety. Injection, wire-fill and tap addition forms. Aluminothermic grades available.
High-surface-area iron powder, 300-450 ml O2/g capacity, food-contact grades. Absorber sachets, hand warmers, pharma packaging. Lot-certified reaction curves.
Micron and nano ZVI with certified TCE/Cr(VI) reduction rates. PRB barriers, direct-push injection, regulatory documentation packages. Project-scale supply.
CATEGORY INTRODUCTION
Reactive, reducing, alloying, and catalytic metal powders supplied around process requirements.
Metal3DP organizes this family around reduction · catalysis · cementation, with material options including Fe · Ni · Cu · Specialty Metals. Individual grades document the chemistry, particle behavior, technical limits, applications, and relevant material comparisons.
Standard products can be matched to established manufacturing routes, while custom programs can align particle cuts, composition, processing, packaging, and lot inspection with the customer’s production window.
CATEGORY ADVANTAGES
A useful powder specification connects material composition, particle behavior, manufacturing conditions, inspection, and supply consistency.
Particle size, morphology, flow, apparent density, and surface condition are aligned with the intended manufacturing route.
Standard and custom compositions connect material behavior with service temperature, wear, strength, conductivity, or joining performance.
Agreed chemistry, particle distribution, inspection values, packaging, and traceability can be controlled at lot level.
Material selection starts with the equipment, process window, finished component, annual volume, and quality requirements.
COMPANY INTRODUCTION
Metal3DP Technology Co., Ltd. is an advanced metal powder supplier headquartered in Qingdao, China. We combine material engineering, powder production resources, application support, inspection, and international supply coordination across demanding manufacturing processes.
For chemical & metallurgical process powders, our team translates equipment, process conditions, finished-part targets, annual volume, and documentation needs into a practical purchase specification and quality plan.
About Metal3DPCATEGORY FAQ
Technical answers for material selection, customization, quality documentation, and supply discussions.
Chemical & Metallurgical Process Powders support manufacturing routes and industrial applications where chemistry, particle size, morphology, and process consistency directly influence finished-part performance. Review the individual grades for specific applications and operating windows.
Start with the application and manufacturing process, then define chemistry, particle distribution, morphology, flow, apparent density, and any critical performance targets. Metal3DP can compare these requirements with the available chemical & metallurgical process powders.
Yes. Depending on the material family and production route, custom chemistry, particle cuts, blending, coating, heat treatment, and packaging can be reviewed against the required volume and specification.
Available documentation can include chemical composition, particle size distribution, morphology, apparent density, flow behavior, and other agreed inspection values on a lot-level certificate of analysis.
Share the product or alloy, process, target particle size, equipment, finished application, annual volume, destination, and required standards. This allows the material team to identify a standard grade or define a custom supply specification.
CUSTOM POWDER PROGRAMS
Share your process, equipment, performance target, annual volume, and destination. We will match an existing grade or define a custom supply specification.
