PRODUCT CATEGORY
Fine, controlled powders developed for feedstock homogeneity and complex near-net-shape parts.
AVAILABLE GRADES
Review individual chemistry, technical specifications, application guidance, material comparisons, and inquiry access for every published grade in this category.
High-flow 316L stainless MIM powder, D90 < 22 µm, O < 800 ppm, sintered density > 7.6 g/cm³. Custom cuts for catalytic, solvent and water-based feedstock systems. Request a quote.
Gas-atomized 17-4PH MIM powder reaching 900-1100 MPa after H900 aging. Lot-certified chemistry and aging response for lock, firearm, medical and energy parts.
99.5%+ pure carbonyl iron powder in graded 1-10 µm fractions. Low coercive force grades for soft magnetic MIM, matrices and absorbers. Stabilized for safe handling.
Cost-optimized Fe-2Ni MIM powder, 700-900 MPa after carburize-quench. Gas atomized and hybrid grades for high-volume structural parts. Get pricing.
Gas-atomized M2 MIM powder with lot-specific sintering curves. W-free export-friendly variant available. Micro drills, knurling wheels, punch tips.
Fine spherical Ti6Al4V MIM powder, O < 0.20%, sintered strength > 830 MPa. Grade 5 and ELI Grade 23. Vacuum-sealed lots with full interstitial certification.
CATEGORY INTRODUCTION
Fine, controlled powders developed for feedstock homogeneity and complex near-net-shape parts.
Metal3DP organizes this family around injection molding & sintering, with material options including Stainless Steel · Tool Steel · Alloys. Individual grades document the chemistry, particle behavior, technical limits, applications, and relevant material comparisons.
Standard products can be matched to established manufacturing routes, while custom programs can align particle cuts, composition, processing, packaging, and lot inspection with the customer’s production window.
CATEGORY ADVANTAGES
A useful powder specification connects material composition, particle behavior, manufacturing conditions, inspection, and supply consistency.
Particle size, morphology, flow, apparent density, and surface condition are aligned with the intended manufacturing route.
Standard and custom compositions connect material behavior with service temperature, wear, strength, conductivity, or joining performance.
Agreed chemistry, particle distribution, inspection values, packaging, and traceability can be controlled at lot level.
Material selection starts with the equipment, process window, finished component, annual volume, and quality requirements.
COMPANY INTRODUCTION
Metal3DP Technology Co., Ltd. is an advanced metal powder supplier headquartered in Qingdao, China. We combine material engineering, powder production resources, application support, inspection, and international supply coordination across demanding manufacturing processes.
For metal injection molding (mim) powders, our team translates equipment, process conditions, finished-part targets, annual volume, and documentation needs into a practical purchase specification and quality plan.
About Metal3DPCATEGORY FAQ
Technical answers for material selection, customization, quality documentation, and supply discussions.
Metal Injection Molding (MIM) Powders support manufacturing routes and industrial applications where chemistry, particle size, morphology, and process consistency directly influence finished-part performance. Review the individual grades for specific applications and operating windows.
Start with the application and manufacturing process, then define chemistry, particle distribution, morphology, flow, apparent density, and any critical performance targets. Metal3DP can compare these requirements with the available metal injection molding (mim) powders.
Yes. Depending on the material family and production route, custom chemistry, particle cuts, blending, coating, heat treatment, and packaging can be reviewed against the required volume and specification.
Available documentation can include chemical composition, particle size distribution, morphology, apparent density, flow behavior, and other agreed inspection values on a lot-level certificate of analysis.
Share the product or alloy, process, target particle size, equipment, finished application, annual volume, destination, and required standards. This allows the material team to identify a standard grade or define a custom supply specification.
CUSTOM POWDER PROGRAMS
Share your process, equipment, performance target, annual volume, and destination. We will match an existing grade or define a custom supply specification.
