PRODUCT CATEGORY
Precisely sized filler metals for consistent wetting, joint formation, and controlled thermal cycles.
AVAILABLE GRADES
Review individual chemistry, technical specifications, application guidance, material comparisons, and inquiry access for every published grade in this category.
AWS A5.8 BNi-2 paste-grade powder, 971-999°C melting, self-fluxing in vacuum or hydrogen. Custom mesh cuts for dispensing, printing and tape. Lot-certified chemistry.
J-STD-006 SAC305 powder, O < 100 ppm, satellite-free T3-T8 cuts for stencil and jet printing. Custom distributions and low-Ag alternatives. Lot SEM certification.
Sn42Bi58 powder melting at 138°C for LED, flex circuit and step soldering. T3-T6 cuts, O < 100 ppm, SnBiAg ductility variants. Full export documentation handled.
AlSi12 eutectic powder (577°C) for CAB furnace brazing of radiators, condensers and EV battery cooling plates. Paste and spray cuts, AlSi7.5/10 variants.
BCuP-2 to BCuP-5 powder for paste, rings and preforms. Self-fluxing on copper, silver-bearing options for brass and wide gaps. AWS A5.8 certified lots.
Cu-14Sn-10Ti active braze forming chemical TiC bonds to diamond and ceramics. Paste-grade cuts, custom titanium levels, qualification lots for toolmakers.
CATEGORY INTRODUCTION
Precisely sized filler metals for consistent wetting, joint formation, and controlled thermal cycles.
Metal3DP organizes this family around brazing · soldering · paste, with material options including Ni · Cu · Ag · Sn Alloys. Individual grades document the chemistry, particle behavior, technical limits, applications, and relevant material comparisons.
Standard products can be matched to established manufacturing routes, while custom programs can align particle cuts, composition, processing, packaging, and lot inspection with the customer’s production window.
CATEGORY ADVANTAGES
A useful powder specification connects material composition, particle behavior, manufacturing conditions, inspection, and supply consistency.
Particle size, morphology, flow, apparent density, and surface condition are aligned with the intended manufacturing route.
Standard and custom compositions connect material behavior with service temperature, wear, strength, conductivity, or joining performance.
Agreed chemistry, particle distribution, inspection values, packaging, and traceability can be controlled at lot level.
Material selection starts with the equipment, process window, finished component, annual volume, and quality requirements.
COMPANY INTRODUCTION
Metal3DP Technology Co., Ltd. is an advanced metal powder supplier headquartered in Qingdao, China. We combine material engineering, powder production resources, application support, inspection, and international supply coordination across demanding manufacturing processes.
For brazing filler & solder powders, our team translates equipment, process conditions, finished-part targets, annual volume, and documentation needs into a practical purchase specification and quality plan.
About Metal3DPCATEGORY FAQ
Technical answers for material selection, customization, quality documentation, and supply discussions.
Brazing Filler & Solder Powders support manufacturing routes and industrial applications where chemistry, particle size, morphology, and process consistency directly influence finished-part performance. Review the individual grades for specific applications and operating windows.
Start with the application and manufacturing process, then define chemistry, particle distribution, morphology, flow, apparent density, and any critical performance targets. Metal3DP can compare these requirements with the available brazing filler & solder powders.
Yes. Depending on the material family and production route, custom chemistry, particle cuts, blending, coating, heat treatment, and packaging can be reviewed against the required volume and specification.
Available documentation can include chemical composition, particle size distribution, morphology, apparent density, flow behavior, and other agreed inspection values on a lot-level certificate of analysis.
Share the product or alloy, process, target particle size, equipment, finished application, annual volume, destination, and required standards. This allows the material team to identify a standard grade or define a custom supply specification.
CUSTOM POWDER PROGRAMS
Share your process, equipment, performance target, annual volume, and destination. We will match an existing grade or define a custom supply specification.
