PRODUCT CATEGORY
Wear, corrosion, and thermal protection chemistries for demanding surface engineering programs.
AVAILABLE GRADES
Review individual chemistry, technical specifications, application guidance, material comparisons, and inquiry access for every published grade in this category.
Cu-9Al and NiAl-bronze thermal spray powders for propeller shafts, pumps and marine rebuilds. Excellent machinability and seawater durability. Flame, arc, plasma cuts.
Gas-atomized MCrAlY powders for turbine TBC bond coats and hot corrosion protection. APS, VPS, HVOF cuts with certified yttrium content and OEM-spec chemistries.
Self-fluxing NiCrBSi hardfacing powder in 45/55/60 HRC grades. HVOF and spray-fuse cuts, custom WC blends, lot-certified hardness. Pump shafts, valve seats, agri wear parts.
High-purity cold spray copper, O < 0.10%, > 85% IACS as-sprayed conductivity. Spherical and irregular morphologies matched to your system. Electrical, thermal, repair applications.
Agglomerated & sintered Cr3C2-25NiCr HVOF powder for boiler tubes, valves and turbine parts. Cobalt-free, nuclear-suitable. Lot-certified deposit efficiency.
Exothermic NiAl 95/5 bond coat powder, > 40 MPa bond strength. Clad and pre-alloyed forms for flame, plasma and arc spray. Universal first layer for coating systems.
CATEGORY INTRODUCTION
Wear, corrosion, and thermal protection chemistries for demanding surface engineering programs.
Metal3DP organizes this family around hvof · plasma · pta, with material options including Ni Alloys · Co Alloys · Carbides. Individual grades document the chemistry, particle behavior, technical limits, applications, and relevant material comparisons.
Standard products can be matched to established manufacturing routes, while custom programs can align particle cuts, composition, processing, packaging, and lot inspection with the customer’s production window.
CATEGORY ADVANTAGES
A useful powder specification connects material composition, particle behavior, manufacturing conditions, inspection, and supply consistency.
Particle size, morphology, flow, apparent density, and surface condition are aligned with the intended manufacturing route.
Standard and custom compositions connect material behavior with service temperature, wear, strength, conductivity, or joining performance.
Agreed chemistry, particle distribution, inspection values, packaging, and traceability can be controlled at lot level.
Material selection starts with the equipment, process window, finished component, annual volume, and quality requirements.
COMPANY INTRODUCTION
Metal3DP Technology Co., Ltd. is an advanced metal powder supplier headquartered in Qingdao, China. We combine material engineering, powder production resources, application support, inspection, and international supply coordination across demanding manufacturing processes.
For thermal spray & hardfacing powders, our team translates equipment, process conditions, finished-part targets, annual volume, and documentation needs into a practical purchase specification and quality plan.
About Metal3DPCATEGORY FAQ
Technical answers for material selection, customization, quality documentation, and supply discussions.
Thermal Spray & Hardfacing Powders support manufacturing routes and industrial applications where chemistry, particle size, morphology, and process consistency directly influence finished-part performance. Review the individual grades for specific applications and operating windows.
Start with the application and manufacturing process, then define chemistry, particle distribution, morphology, flow, apparent density, and any critical performance targets. Metal3DP can compare these requirements with the available thermal spray & hardfacing powders.
Yes. Depending on the material family and production route, custom chemistry, particle cuts, blending, coating, heat treatment, and packaging can be reviewed against the required volume and specification.
Available documentation can include chemical composition, particle size distribution, morphology, apparent density, flow behavior, and other agreed inspection values on a lot-level certificate of analysis.
Share the product or alloy, process, target particle size, equipment, finished application, annual volume, destination, and required standards. This allows the material team to identify a standard grade or define a custom supply specification.
CUSTOM POWDER PROGRAMS
Share your process, equipment, performance target, annual volume, and destination. We will match an existing grade or define a custom supply specification.
