PRODUCT CATEGORY
Compressible iron and steel powder systems for repeatable, high-volume structural components.
AVAILABLE GRADES
Review individual chemistry, technical specifications, application guidance, material comparisons, and inquiry access for every published grade in this category.
Pre-alloyed CuSn10 with certified dimensional change per lot. Precision bushings, porous filters, marine PM. Lead-free compliant, custom cuts.
Distaloy-type diffusion alloyed powder, 800-1200 MPa heat-treated, Jominy certified per lot. Transmission gears, synchronizer parts, EV drivetrain PM.
>99% water atomized iron powder with compressibility above 6.9 g/cm³ at 600 MPa for structural PM parts, gears, sprockets, premixes, and warm compaction.
Water atomized 316L PM grade, 6.6-7.2 g/cm³ sintered, certified corrosion performance. Pump, lock, marine and filter parts. 304L/410L alternatives.
Cu, CuSn, CuZn friction powders with certified sintering behavior. Motorcycle, racing, wind and industrial brakes. Pre-blended matrices, IATF documentation.
99.5-99.9% dendritic copper, top green strength for PM bearings and brushes. Light/medium/heavy density grades, Cu-10Sn premixes, cold spray cuts.
CATEGORY INTRODUCTION
Compressible iron and steel powder systems for repeatable, high-volume structural components.
Metal3DP organizes this family around die compaction & sintering, with material options including Pure Fe · Alloyed Steel · Premixes. Individual grades document the chemistry, particle behavior, technical limits, applications, and relevant material comparisons.
Standard products can be matched to established manufacturing routes, while custom programs can align particle cuts, composition, processing, packaging, and lot inspection with the customer’s production window.
CATEGORY ADVANTAGES
A useful powder specification connects material composition, particle behavior, manufacturing conditions, inspection, and supply consistency.
Particle size, morphology, flow, apparent density, and surface condition are aligned with the intended manufacturing route.
Standard and custom compositions connect material behavior with service temperature, wear, strength, conductivity, or joining performance.
Agreed chemistry, particle distribution, inspection values, packaging, and traceability can be controlled at lot level.
Material selection starts with the equipment, process window, finished component, annual volume, and quality requirements.
COMPANY INTRODUCTION
Metal3DP Technology Co., Ltd. is an advanced metal powder supplier headquartered in Qingdao, China. We combine material engineering, powder production resources, application support, inspection, and international supply coordination across demanding manufacturing processes.
For press & sinter (pm) powders, our team translates equipment, process conditions, finished-part targets, annual volume, and documentation needs into a practical purchase specification and quality plan.
About Metal3DPCATEGORY FAQ
Technical answers for material selection, customization, quality documentation, and supply discussions.
Press & Sinter (PM) Powders support manufacturing routes and industrial applications where chemistry, particle size, morphology, and process consistency directly influence finished-part performance. Review the individual grades for specific applications and operating windows.
Start with the application and manufacturing process, then define chemistry, particle distribution, morphology, flow, apparent density, and any critical performance targets. Metal3DP can compare these requirements with the available press & sinter (pm) powders.
Yes. Depending on the material family and production route, custom chemistry, particle cuts, blending, coating, heat treatment, and packaging can be reviewed against the required volume and specification.
Available documentation can include chemical composition, particle size distribution, morphology, apparent density, flow behavior, and other agreed inspection values on a lot-level certificate of analysis.
Share the product or alloy, process, target particle size, equipment, finished application, annual volume, destination, and required standards. This allows the material team to identify a standard grade or define a custom supply specification.
CUSTOM POWDER PROGRAMS
Share your process, equipment, performance target, annual volume, and destination. We will match an existing grade or define a custom supply specification.
